New Products

The Black Dog Machine AR-15 .22 LR Sonic Weld X-Form is a 25-round magazine for AR-15 style .22 LR firearms and conversion units, such as the Nordic Components uppers. It features nylon feed lips and...

The GG&G 45 Degree Offset Accessory Rail is a 45 degree offset rail that mounts to a Picatinny rail and holds a micro red dot as a secondary sight for close-range engagements. It can also be installed...

The GG&G AK-47 800m Ghost Ring Rear Sight is a ghost ring aperture sight that replaces the factory U-notch rear sight on AK pattern rifles. The aperture gives faster and more precise sight alignment...

The GG&G Benelli M2 12ga Barrel Clamp is a light and strong aluminum barrel clamp for the Benelli M2 shotgun. It provides additional support for an extended magazine tube and is designed specifically...

The GG&G Benelli M2 Red Dot Mount Burris FastFire is a low-profile red dot mount for the receiver of the Benelli M2 shotgun. It has the Burris FastFire 3 and FastFire 4 footprint and is positioned for...

The GG&G Benelli M2 Red Dot Mount RMR is a low-profile red dot mount for the receiver of the Benelli M2 shotgun. It has the Trijicon RMR footprint and is positioned for true center co-witness with the...

The GG&G Benelli M2 Scope Mount is a one-piece, low-profile Picatinny rail (MIL-STD-1913) for the receiver of the Benelli M2 shotgun. It installs in the factory drilled and tapped receiver holes and...

The GG&G Beretta 1301 Aimpoint Optic Rail Mount is an optic mounting platform for the receiver of the Beretta 1301 shotgun, made for the Aimpoint H-1, H-2, T-1 and T-2. It includes an XS Sights full...

The GG&G Beretta 1301 Holosun HE509T Optic Rail Mount is an optic mounting platform for the receiver of the Beretta 1301 shotgun, made for the Holosun HE509T. It includes an XS Sights full ghost ring...

The GG&G Beretta 1301 M-LOK Barrel Clamp is an aluminum barrel clamp for the Beretta 1301 shotgun. It replaces the factory plastic barrel clamp and adds an M-LOK mounting point at the front of the...

The GG&G Beretta 1301 RMR Optic Rail Mount is an optic mounting platform for the receiver of the Beretta 1301 shotgun, made for the Trijicon RMR. It includes an XS Sights full ghost ring rear sight...

The GG&G Beretta 1301 Red Dot Mount Burris FastFire is a low-profile red dot mount for the Beretta 1301 shotgun. It uses the Burris FastFire 3 and FastFire 4 footprint and is positioned to give a true...

The GG&G Beretta 1301 Red Dot Mount RMR is a low-profile red dot mount for the receiver of the Beretta 1301 shotgun. It has the Trijicon RMR footprint and is positioned for true center co-witness with...

The GG&G Flip To Side Magnifier Mount is a flip-to-side mount for magnifiers with a 30 mm tube. The magnifier flips 90 degrees to the side of the primary optic in one motion, allowing fast transitions...

The GG&G M-LOK 45 Degree Offset Rail 3-Slot is a 45 degree offset rail for M-LOK handguards with three Picatinny slots. It positions a light or small optic at the 11 or 1 o'clock position. The rail is...

The GG&G M-LOK Harris Bipod Adapter is a low-profile adapter for mounting a Harris style bipod to an M-LOK handguard. It features a standard swivel stud interface locked in a stationary position for...

The GG&G M-LOK QD Sling Attachment is a QD sling mount for M-LOK handguards, supplied with a GG&G Heavy Duty QD sling swivel . The low, no-snag design uses the Magpul-designed M-LOK system. The QD...

The GG&G QD Side Sling Attachment for Dovetails is a QD sling mount for Picatinny rails that can be installed anywhere on a railed handguard or upper receiver, on either the side or the top rail. This...

The GG&G Remington 870 Red Dot Mount Burris FastFire is a low-profile red dot mount for the Remington 870 shotgun. It uses the Burris FastFire 3 and FastFire 4 footprint , and according to the...

The GG&G Remington 870 Red Dot Mount Trijicon RMR is a low-profile red dot mount for the Remington 870 shotgun. It uses the Trijicon RMR footprint , which is shared by many other red dots such as the...

The KynSHOT PB6003 Hydraulic Guide Rod is a hydraulically damped recoil spring guide rod for Glock 19 Gen 1-3 and Gen 6 pistols. It is a direct drop-in replacement for the standard guide rod assembly...

The KynSHOT PB6004 Hydraulic Guide Rod is a hydraulically damped recoil spring guide rod for Glock 17 Gen 5 pistols. It is a direct drop-in replacement for the standard guide rod assembly that...

The KynSHOT RB5000 Hydraulic Buffer is a hydraulic recoil buffer for AR-15 rifles with a Mil-Spec carbine buffer tube (7" / 177.8 mm internal depth). It installs as a direct drop-in replacement...

The KynSHOT RB5000HP High Performance is a hydraulic recoil buffer for over-gassed AR-15 rifles and 9 mm radial delayed blowback systems such as those from CMMG. It is optimized for a Mil-Spec carbine...

The KynSHOT RB5007 is a hydraulic recoil buffer for 9 mm pistol caliber carbines (PCC) with a Mil-Spec carbine buffer tube (7" / 177.8 mm internal depth). Developed in collaboration with...

The KynSHOT RB5015HD Heavy Damped is a more heavily damped hydraulic recoil buffer for pistol caliber carbines (PCC) with a Mil-Spec carbine buffer tube (7" / 177.8 mm internal depth). Developed...

The KynSHOT RB5020SS Short Stroke is a hydraulic recoil buffer for competition pistol caliber carbines (PCC). It is longer and heavier than a standard buffer and shortens bolt travel (short stroke)...

The Nordic Components NC-22 Charging Handle is a charging handle for the Nordic Components NC22 .22 LR upper. The charging handle is used to pull the bolt to the rear, for example when loading the...

The Nordic Components NC22RB Extractor is an original spare part for the Nordic Components NC22RB (NC-22) .22 LR upper. It is the bolt extractor that pulls the case out of the chamber. The part is...

The Nordic Components NC22RB Firing Pin is an original spare part for the Nordic Components NC22RB (NC-22) .22 LR upper. It is the bolt firing pin that fires the cartridge. The part is intended for...

The Nordic Components NC22RB Firing Pin Retainer is an original spare part for the Nordic Components NC22RB (NC-22) .22 LR upper. It is the firing pin retainer that holds the firing pin in place in...