



- Product Code: 8719076037460
- EAN: 8719076037460
- Warranty: 5 years
- Immediately from our warehouseThe product will be sent in 2 days
- Check store availability here
- Delivery costs starting from 0,00 € (Estonia)
Victron Blue Smart IP22 Charger 12V 30A (3) - The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
This excellent three-output charger is suitable for the home, the summer cottage, the motorhome and of course the boat. The charger is easy to install in a boat with a shore power socket and to route the power from the charger to the batteries. You can connect three batteries to the charger at once, or alternatively only one or two. All Victron Blue Smart chargers are smart chargers, so the charger detects how many batteries have been connected. You can easily control this charger via Bluetooth, but you can also control the charger's battery selector with a quick button. The Bluetooth app shows the charging history, but you can easily see the charging progress on the charger's cover. With Bluetooth you can adjust the charger's functions and, for example, reduce the charging power. For batteries under 50Ah a charging current of 15A is recommended and for batteries over 50Ah 30A.
- The charger works in a 12V system
- The 30A charging current is distributed evenly to all batteries
- All batteries must be of the same type, for example lithium batteries
If you are building a charging system in a boat, it is recommended that all three batteries are of the same type. For example, a starter lithium as the starter battery, 12V 50Ah / 100Ah lithium electronics batteries and a 12V 50Ah / 100Ah lithium battery for the bow-mount trolling motor. When you connect the charger to mains power, the Victron Blue Smart charger charges all batteries in the same mode. - The Victron Blue Smart is a smart charger, so you can leave the charger connected to mains power; the charger goes into float mode and does not overcharge the batteries.
The battery is charged, smartly... to perfect condition - The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance and a longer life.
Recovery of deeply-discharged batteries - Unlike other brands, the Blue Smart IP22 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Note that unlike other Victron Blue Smart chargers, the protection class of this charger is IP22, so the charger is not suitable for a space where it is in direct contact with water. Also make sure there is air circulation at the installation location so that moisture cannot accumulate in the charger.
Connecting the charger to the batteries is easy. At the bottom of the charger there is a separate positive terminal for each battery and one common negative terminal.
Victron Blue Smart IP22 Charger 12V 30A (3) Main Features:
- Input voltage range: 180 - 265 VAC
- Charge current, normal mode: 15 / 20 / 30 A
- Charge current, NIGHT or LOW: 7.5 / 10 / 15 A
- Efficiency: 93 %
- No load power consumption: 0.5 W
- Frequency: 45 - 65 Hz
- Number of outputs: 3
- Charge voltage 'absorption': Normal: 14.4 V High: 14.7 V Li-ion: 14.2 V
- Charge voltage 'float': Normal: 13.8 V High: 13.8 V Li-ion: 13.5 V
- Charge voltage 'storage': Normal: 13.2 V High: 13.2 V Li-ion: 13.5 V
- Charge algorithm: 6-stage adaptive
- Can be used as power supply: Yes
- Protection: Battery reverse polarity (fuse), Output short circuit, Over temperature
- Operating temp. range: -40 to +60 °C (full rated output up to 40 °C)
- Humidity (non-condensing): Max 98 %
- Battery connection: Screw terminals 16 mm2 / AWG6
- Protection category: IP22
Product text updated 26.9.2026.
