Lowrance / Simrad Yamaha Engine Interface Cable for NMEA2000

Lowrance / Simrad Yamaha Engine Interface Cable for NMEA2000 -  the 15-foot Yamaha Engine Interface cable allows Yamaha engines to connect directly to a Lowrance NMEA 2000 network without the need for the CommandLink Plus system. The interface cable comes with a NMEA 2000 network T-connector.

Note that the boat must already have an NMEA 2000 network. If you do not yet have an NMEA 2000 network, you can easily build one with the NMEA 2000 Starter Kit.

Yamaha Engine Interface Cable details: 

• Connects to Yamaha engines without Yamaha CommandLink Plus system. 
• -2006 & newer: F50, T50, F60, T60, F75, F90, F115, LF115, F150, LF150, F200, LF200, F225, F225, F250, LF250.
  -2006 & newer: Z150, LZ150, VZ150, Z175, Z200, LZ200, VZ225, Z250, LZ250, VZ250, Z300, LZ300, VZ300. 
• Yamaha| 4-stroke 50-250| 2-stroke HDPI 150-350 
  RPM:                        Yes| Yes 
  Alternator Voltage:   Yes| Yes 
  Engine Hours:          Yes| Yes 
  Engine Temperature:Yes| Yes 
  Fuel Pressure:           Yes| Yes 
  Fuel Rate:                 Yes| Yes 
  Oil Pressure:             Yes| Yes 
  Trim:                         Yes| Yes 
  Water Pressure:         Yes| Yes 
• *Digital trim must be connected by a Yamaha dealer. 
• *Requires NMEA 2000 network. Kit includes T-connector to connect to a new or existing NMEA 2000 network. Add NMEA 2000 starter kit, part number 000-0124-69, if a network is not already installed. 

Product text updated 26.9.2026.