- Available in stockThe product will be sent in 2-4 days
- Immediately from our warehouseThe product will be sent in 2 days
- Product temporarily out of stock
- Immediately from our warehouseThe product will be sent in 2 days
Ancor Heat Shrink Connectors - offer heat activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water tight seal and the ultimate vibration and strain relief.
High-quality spade terminals for connecting electrical wires to fuse boxes and bus bars. With a heat gun or a gas torch, you can shrink the terminal watertight and make the connection sturdy. The spade terminal is tinned and of very high quality and will not oxidize even over years. When you crimp the terminal and heat it watertight, your wire will not come loose from the terminal.
The most common wire size for fishfinders is 1.5-2.5mm2, and displays do not need thicker wires. With this spade terminal, you can easily and securely connect wires, for example, to Blue Sea fuse boxes with screw terminals for the wires.
- Available for:
1-5mm2 wires - Available in two sizes: 4mm and 4.8mm
- Available in packs of 3 in all stores.
Ancor Heat Shrink Connectors info:
- Tinned for corrosion resistance
- Pure copper for maximum current flow
- Brazed seam for maximum strength
- UL listed and CSA recognized
Product text updated 26.9.2026.
