BoreTech Bullet Knock-out Set .17 Cal - .50 Cal

Bore Tech Bullet Knock-out Set 17-50 is a bullet removal tool for rifles and pistols in calibers .17-.50, designed for the safe removal of stuck bullets or cases without damaging the cleaning rod. Its compact and effective design makes the set a useful accessory for the shooting range and among gunsmithing and maintenance supplies.

The set is machined from solid brass, making the tools durable and well suited for firearm maintenance. Four different-sized tips are included, covering a wide caliber range from .17 caliber up to .50 caliber. Each tip features machined identification rings, allowing the correct size for the caliber to be selected quickly and clearly.

Bullet Knock Outs tools are attached to the end of a suitably sized cleaning rod, after which a stuck bullet or case can be removed in a controlled manner in line with the bore. The tool reduces the risk of damaging the cleaning rod and helps prevent interruptions during a day at the range. The product is made in the United States.

When using the tool, it is important to ensure that the firearm is unloaded and that magazines, bolts, and firing mechanisms have been removed before starting work. The tool must not be used on a loaded cartridge or live ammunition. Stuck bullets should always be driven backward toward the chamber, and the cleaning rod handle must not be struck with any object to avoid damaging the rod or the firearm.

Bore Tech Bullet Knock-out Set 17-50 - Features:

• Product type: bullet removal tool
• Intended use: removing stuck bullets and cases
• Compatibility: rifles and pistols
• Caliber range: .17-.50
• Material: solid brass
• Number of tips: 4 pcs
• Identification: machined identification rings on each tip
• Country of manufacture: United States
• .17-.20 caliber: 1 identification ring, thread size 5/40, A dimension 3.94 mm (0.155 inches), B dimension 33.27 mm (1.31 inches)
• .22 caliber - 6.5 mm: 2 identification rings, thread size 8/32, A dimension 4.88 mm (0.192 inches), B dimension 33.27 mm (1.31 inches)
• .270-.338 caliber: 3 identification rings, thread size 8/32, A dimension 5.59 mm (0.220 inches), B dimension 33.27 mm (1.31 inches)
• .35 caliber and larger: 4 identification rings, thread size 8/32, A dimension 7.11 mm (0.280 inches), B dimension 33.27 mm (1.31 inches)
• Use step 1: ensure that the firearm is unloaded, and remove all magazines, bolts, and firing mechanisms
• Use step 2: select the correct size Bullet Knock Out based on the caliber chart
• Use step 3: screw the Bullet Knock Out onto the end of a suitably sized cleaning rod
• Use step 4: hold the rifle muzzle upward and insert the rod from the muzzle end
• Use step 5: center the rod in the bore with your free hand and protect the muzzle
• Use step 6: keep the rod tip approximately 25.4-30.5 cm (10-12 inches) above the stuck bullet or case and release the rod so gravity accelerates it
• Use step 7: larger calibers, tightly stuck bullets, or cases may require several drops
• Use step 8: stuck bullets should always be driven backward toward the chamber
• Safety instruction: must not be used with a loaded cartridge or live ammunition
• Warning: do not strike the cleaning rod handle with any object, as the rod or firearm may be damaged

In summary, the set provides a practical solution for removing stuck bullets and cases without subjecting the cleaning rod to unnecessary stress. The brass construction, clearly identifiable tips, and broad caliber compatibility make it a useful tool for regular firearm maintenance.

Recommended use: suitable for shooters and firearm maintenance professionals who want to be prepared to remove a stuck bullet or case in a controlled manner at the range or during maintenance, using a tool appropriate for the firearm.

Product text updated on 21 July 2026.