Ruoto Red Ready Battery Cable

Ruoto Ready Battery Cable - the battery and electronics cable is intended for use between the main power switch and the fuse / fuse box. 16mm2 is intended for use between the bow engine's main power switch and the automatic fuse, and 5mm2 is intended for use between the electronics battery's main power switch and the fuse / fuse box. The main power switch has an M10 (10mm bolt) bolt and the automatic fuse, fuse box + base, connection bolt or strip has an M8 (8mm bolt) bolt, and therefore all these ready-made cables have a cable loop with an M10 hole at one end and a cable loop with an M8 hole at the other end. Each cable loop is mechanically pressed and of very high quality. The conductor is a flexible battery cable made for marine use.

We recommend that only a separate main power switch is placed between the bow motor and the automatic fuse. This cable is difficult to make yourself because few have the tools to crimp the ring terminals themselves. The cable must also be of high quality and the connections of high quality, as the cable must not be the weak point of the connection.
Since boats nowadays have a lot of electronics connected, it is recommended that the electronics have their own battery. In this case, the boat's main power switch is not in the same connection with the electronics battery, and therefore it is good to place a main power switch between the electronics battery and the electronics fuse box. Between this main power switch and the fuse box + base, you need a high-quality cable with high-quality and correctly sized ring terminals at the ends. 

Ruoto Ready Battery Cable Main Features:  

• Available in two sizes: 16mm2 and 5mm2
• Available in three lengths: 15cm, 25cm, and 50cm
• 16mm2 cable with cable loop mechanically pre-made. One end with 10mm and 8mm holes
• 16mm2 cable with ring terminal mechanically pre-made. One end with 10mm and 8mm holes
• Battery cable of very high quality
• One cable in the sales package
• Color red